PRODUCT INFORMATION:

Before OXI-BLOC

 After OXI-BLOC

Before OXI-BLOC

After OXI-BLOC

IS A ONE COMPONENT HIGH PERFORMANCE INDUSTRIAL MAINTENANCE COATING, DESIGNED FOR LONG TERM PROTECTION OF STEEL EXPOSED TO HARSH ATMOSPHERIC CONDITIONS. OXI-BLOC IS A HIGH BUILD INORGANIC/ORGANIC COMPLEX PLATELET STRUCTURED COATING FORMULA. WHICH IS CHEMICALLY AND PHYSICALLY UNIQUE.

OXI-BLOC'S STRONGEST POINT LIES IN IT'S HIGH AFFINITY FOR METAL SURFACES. This ALLOWS OXI-BI4OC TO BE APPLIED OVER RUSTED SURFACES. THEREBY, ELIMINATING THE NEED FOR SAND BLASTING. 
OXI-BLOC'S HIGH AFFINITY FOR METAL IS HIGHER THAN WATER, ALLOWING THESE SULFONATES TO IMPART WATER DISPLACEMENT PROPERTIES OXI-BLOC IS THIXOTROPIC AND IS RESISTANT TO SAG, RUN OFF AND FLOW. OXI-BLOC IS BELIEVED To BE SUPERIOR TO NOW READILY AVAILABLE CORROSION INHIBITORS. MOREOVER OXI-BLOC IS MORE COST EFFECTIVE DUE TO IT'S ABILITY TO EXCEL WITH ONE HIGH BUILD COAT, UP TO [25] MILS OF WET FILM THICKNESS, AND NO TOP COATING.

USES: 

EXCELLENT FOR MOST METAL SURFACES, INCLUDING, BRIDGES, UTILITY TOWERS, STORAGE TANKS, METAL ROOFS, EQUIPMENT, AND SAFETY BARS.

CHARACTERISTICS: 

COLORS: STOCKED-GRAY AND EGG SHELL WHITE. CUSTOM COLORS ARE AVAILABLE

FINISH: SEMI GLOSS, 20-30 UNITS @ 60

DRYING TIME: @ 77 DE. F. AND 50% R.H. 
  TO TOUCH--24 HRS. 
  TO RECOAT--IMMEDIATELY, NOT TO EXCEED 24 HRS. 
  TO CURE-30 DAYS. 
TOP COATING IS NOT RECOMMENDED WITH OTHER PRODUCTS. 

FLASH POINT: 120 [PMCC1 VOLUME SOLIDS: 66.3% WEIGHT SOLIDS: 72.9 LBS. PER GAL. VOC- 2.3 LBS. PER (;AL. 

VISCOSITY: 108 K U RECOMMENDED FILM THICKNESS: HEAVY RUSTED SURFACES-12 MLS WET RECOMMENDED DFT THICKNESS: 8 MILS DRY 

COVERAGE : 150 SQ. FT. PER GAL. 

PENCIL HARDNESS:--68

APPLICATION: 

SURFACE PREPARATION: SURFACE SHOULD BE DRY, CLEAN, AND FREE FROM ALL CONTAMINATION, INCLUDING DUST, DIRT AND GREASE

OXI-BLOC IS RECOMMENDED FOR NEW OR SAND BLASTED METAL, AS WELL AS PRE- RUSTED METAL AND PACK RUST BUILDUP.

POWER WASHING IS RECOMMENDED ON MOST SURFACES.

METHOD OF APPLICATION: USE BRUSH ROLLER, AND AIRLESS SPRAY USE SPRAY TIP SIZE-0.17, ·" TO 0.25"

MIX THOROUGHLY BEFORE APPLYING.

DO NOT TOP COAT WITH ANY OTHER TYPE OF COATING.

THINNING IS NOT RECOMMENDED.

CLEAN UP: CLEAN UP XVITI1 MINERAL SPIRITS

MSDS Sheet :(click here)

Home | Feedback | SiteMap | Contact Us