PRODUCT INFORMATION:
E-700 STEEL OVERCOAT SYSTEM POLYESTER FINISH
COAT
DESCRIPTION:
VERY HIGH GLOSS DURABLE FINISH
COAT, Formulated FOR USE ON Steel AND Concrete, AND IS USED AS AN ANTI
GRAFFITI COATING IN CLEAR OR COLOR, OR IN CLEAR FORM OVER OTHER COLORS-SEE
OTHER Literature FOR INFO.
COLOR: ANY FEDERAL NOS. CUSTOM COLORS ARE
AVAILABLE
CHEMICAL FAMILY: POLYESTER-ISOCYANATE
E-700 WAS DEVELOPED TO ATTAIN A VERY HARD
HIGH LUSTER FINISH COATING TO STAND UP TO AFFLUENT, CHEMICALS, ABRASION,
AND ANTI MOLESTATION, PRODUCT AKIN TO AN AUTOMOBILE GRADE FINISH.
USES:
E-700 IS AN EXCELLENT FINISH COAT OVER OUR E-400
ALUMINUM, E-500 HIGH BUILD M.I.O.
INTERMEDIATE COAT AND AS A SECOND FINISH COAT IN HARSH ENVIRONMENTS, WHERE
STRONG CHEMICALS PREVAIL. E-700 IS RECOMMENDED FOR NEW AND OLD STEEL, CONCRETE
AND WOOD, AND WHERE VERY HARD COATINGS ARE NEEDED. WE Highly RECOMMEND E-700
FOR STEEL BRIDGES, TANKS, DOCKS, OFF SHORE PLATFORMS AND WHERE THE NEED FOR A
COATING THAT SUSTAINS ITSELF AGAINST HARSH ENVIRONMENTS.
CHARACTERISTICS:
VISCOSITY: 700 KU
WT. %SOLIDS:
69.36
MIX RATIO: 2 TO 1
VOL. % SOLIDS: 56.22
VOC LBS./GAL. 3.43
WT. GAL. 11.21 LBS.
PVC % 31.64
Performance
Data:
Brookfield Viscosity, mPa-s, ASTM D-2196, 22
degrees C
|
250 |
|
|
|
Potlife (Double Viscosity)
|
1.0 hrs. |
|
|
|
Gardner Circular Dry Time Hard Dry
|
6.0 hrs. |
|
|
|
Gloss, ASTM D-523
|
20 degrees |
| 60 degrees |
MEK Double Rubs, TM-2 Method #9
|
|
|
|
200 Double Rubs
|
No Effect |
|
|
|
Graffiti Resistance
|
|
|
|
Marker Test
|
Pass (slight
shadow) |
|
|
Spray Paint Test
|
Pass |
APPLICATION:
MIX RATIO: BY VOL.3 [THREE] 3
PARTS OF PART A PAINT TO I [ONE] PART HARDENER STIR THOROUGHLY, MAKING SURE
THE PRODUCT IS OF ONE CONSISTENCY.
KEEP CONTAINER CLOSED WHEN NOT DIRECTLY BEING USED AS PRODUCT REACTS TO
MOISTURE.
RECOMMENDED FILM THICKNESS:
WET FILM T. 4-5 DFT 2.5-3.5. COVERAGE RATE: [THEORETICAL]
2.5 DFT = 378 SQ. FT. PER GAL
3.0 DFT = 315 SQ. FT. PER GAL.
3.5 DFT = 270 SQ. FT. PER GAL
CURING TIME:
TO TOUCH: 3.5 HRS.
TO HANDLE: 5-6 HRS.
TO RECOAT: 8 HRS. @25 C. @ 50%
HUMIDITY.
MAR-FREE: 25 HRS.
CAUTION:
TO APPLY, TEMP. MUST BE 5 DEGREES ABOVE THE DEW POINT. DO NOT APPLY BELOW
40 DEGREES F. OR OVER 90 DEGREES F.
POT LIFE: 2 TO 3 HOURS.
PRODUCT SHELF LIFE: MINIMUM: ONE YR.
EQUIPMENT:
USE AIRLESS SPRAY, TIP SIZE 0.013
TO 0.017, SOFT BRUSH OR ROLLER. ROLLER MUST BE WELL SATURATED With PRODUCT
BEFORE ROLLING, TO KEEP DOWN AIR BUBBLES. IF USING CLEAR FORM, DUST SHOULD BE
COMPLETELY CLEANED BEFORE APPLYING.
SAFETY PROCEDURES: SEE MSDS Sheet :(click here) Part 1, Part 2
CLEANUP: USE MEK, OR A BLEND OF MEK @ 20%
PM ACETATE @ 30% AND AROMATIC 100 @ 50%.
| 
