ENVIROSHIELD 600 FINISH COAT IS A TWO COMPONENT TOP
COAT.
E-600 Independent Test Results
FINISH: HIGH LUSTER.
COLOR: CUSTOM COLORS AVAILABLE.
USES:
ENVIROSHIELD 600 FINISH COAT IS AN EXTRAORDINARY HIGH STRENGTH, HIGH GLOSS
LUNG LASTING TOP COAT.
ENVIROSHIELD 600 IS HIGHLY RESISTANT TO CHEMICAL CONTACT, WET WEATHER
CONDITIONS, ABRASION, CORROSIVE FUMES, AND UVRS. ENVIROSHIELD 600 IS EXCELLENT FOR TOP COATING USE ENVIROSHIELD 400 PRIMER AS A SEALER AND ENVIROSHIELD 500 MID COAT WHEN A MID COAT MAY BE SPECIFIED.
ENVIROSHIELD 600 FINISH COAT IS AN EXCELLENT TOP COAT FOR PRIMERS AND MID
COATS FUR STRUCTURAL STEEL SUCK AS BRIDGES, TANKS, AND TOWERS. U.S.D.A. APPROVED FOR FOOD
ESTABLISHMENTS.
SURFACE PREPARATION:
SURFACES MUST BE FREE FROM ALL MOISTURE, DIRT, OIL, GREASE AND ALL OTHER
CONTAMINANTS. WATER BLASTING IS RECOMMENDED.
PRODUCT DESCRIPTION:
ENVIROSHIELD 600 IS A TWO COMPONENT, TWO PACKAGE COATING-PRODUCTS [A] AND
[B].
PRODUCT [A] CONTAINS HYDROXYL POLYACRYLATE RESIN
PRODUCT [B] CONTAINS CURING AGENT ALIPHATIC POLYISOCYANATE
RESIN BASED ON HEXAMETHYLENE DIISOCYANATE.
MIXING:
VOLUMETRIC MIX IS 5.66-TO 1 BASE CONVERTER.
STIR WELL PART (A) BEFORE ADDING PART [B]
WHILE STIRRING, ADD PART [B] AND CONTINUE TO STIR WELL.
KEEP UNUSED PRODUCT COVERED SINCE PART [B] REACTS TO MOISTURE.
THINNING: NOT RECOMMENDED
POT LIFE:
1 HR. ® 100 DEGREES F. AND ® 90 % R. HUMIDITY, USABLE.
2 HRS. ® 78 DEGREES F AND ® 50% R. HUMIDITY, USABLE.
3 HRS. ® 78 DEGREES F AND ® 48 % R. HUMIDITY, USABLE.
PRODUCT TECHNICAL DATA:
WEIGHT PER GAL: 11.57 +- 0.23
LBS.
WEIGHT SOLIDS: 7 5 % + ? 1. 5 0 %
VOLUME SOLIDS: 6 1. 6 7 % + ? 1. 5 %
VOC: 333 GRAMS PER LITER OR 2.78 LBS. PER
GAL.
VOC COMPOUNDS: 225-230 (UN THINNED)
STORAGE LIFE: ONE [1) YEAR.
VISCOSITY: STORMIER MTR. ASTM D 562-85
INITIAL 73 KU AFTER 1 HR. 80 KU -AFTER 5 HRS. 94 KU
CURING TIME:
TO TOUCH
: 3 1/2 HRS.
TO HANDLE : 5-6
HRS.
TO RECOAT : 8 HRS.
@ 25 C. @ 50 % HUM
TO HARD DRY : 16 1/2 HRS
TO MAR-FREE: 25 HRS. C.
APPLICATION:
| SAG
RESISTANCE |
RECOMMENDED FILM
THICKNESS |
| LENATA DRAWDOWN |
2.5-4.0 MILS
DRY 3.5-5.5 WET |
|
|
| NO SAG ® 1.0 MIL |
1.0 MIL D.F.T. 946 SQ. FT. PER GAL. |
| NO SAG 0 2.5 MILS |
1.5 MIL D.F.T. 630 SQ. FT. PER GAL. |
| NO SAG 0 3.4 MILS |
2.0 MIL D.F.T. 473 SQ. FT. PER GAL. |
| NO SAG 0 4.25 MILS |
2.5 MIL D.F.T. 378 SQ. FT. PER GAL. |
| NO SAG 0 5.0 MILS |
3.0 MIL D.F.T. 315 SQ. FT. PER GAL. |
| SAG 0 6.0 MILS |
3.5 MIL D.F.T. 270 SQ. FT. PER GAL. |
| SAG 0 6.75 MILS |
4.0 MIL D.F.T. 235 SQ. FT. PER GAL. |
| SAG 0 7.0 MILS |
4.5 MIL D.F.T. 210 SQ. FT. PER GAL. |
| SAG 0 7.75 MILS |
5.0 MIL D.F.T. 190 SQ. FT. PER GAL. |
CAUTION:
SURFACE TEMPERATURE MUST BE AT LEAST FIVE (5) DEGREES F. ABOVE DEW POINT
BEFORE APPLICATION. DO NOT APPLY UNDER 40 D. F. OR OVER 95 D. F.
SAFETY PROCEDURES:
SEE MSDS Sheet : Part 1,
Part 2
EQUIPMENT:
APPLY WITH BRUSH, SPRAY OR
ROLLER AIRLESS SPRAYER USE TIP SIZE 0.009 OR 0.013
CLEANUP:
USE MEK OR A BLEND OF MEK 0 20%, PM ACETATE 0 30 % AND AROMATIC 100 0 50 %
FOR
