M.LO. AND OTHER PIGMENTS ARE USED FOR PENETRATING PRIMER- SEALERS, FOR STEEL STRUCTURES, SUCH AS BRIDGES,
TANKS AND WHERE A FIRST STAGE SEALER IS DESIRED UNDER BARRIER COATS AND FINISH COATS.
E - 2000 SHOULD BE TOP COATED SOON AFTER DRYING.
E - 2000
AFFORDS HIGH RESISTANCE TO CORROSION, MOISTURE, CHEMICAL, ABRASION AND UNDERCUTTING.
E - 2000 IS APPROVED FOR FOOD PLANTS.
| WEIGHT SOLIDS: |
%69.O +- 2% |
| WEIGHT PER GAL: |
9.6 LBS. |
| VOLUME SOLIDS: |
% 60.0 |
| VOC LBS. PER GAL.: |
3.33 GRAMS |
| PERIL |
395.8 |
|
|
| RECOMMENDED D.F.T. @ 2-4 MILS |
CURING TIME TO TOUCH:
|
2 HRS. |
TO HANDLE:
|
3-4 HRS. |
TO RECOAT @ 77 DEGREES F. @ 50% HUMIDITY:
|
4 HRS. |
COVERAGE RATES: [ THEORETICAL ]
| 5.5 D.F.T. |
=145 SQ. FT. PER GAL. |
| 4.0 |
=175 |
| 3.5 |
=275 |
| 3.0 |
=315 |
| 2.5 |
= 375 |
| 2.0 |
= 475 |
| 1.0 |
=946 |
SURFACE PREPARATION:
SURFACE MUST BE FREE OF ALL MOISTURE, DIRT, OIL, GREASE AND OTHER
CONTAMINANTS.
TOOL CLEANING:
LITTLE HAND TOOL CLEANING IS NECESSARY WHEN HIGH PRESSURE WATER BLASTING IS
USED.
RECOAT TIME:
TOP COAT SHOULD BE APPLIED IN LESS THAN 2 DAYS.
APPLICATION:
STIR THOROUGHLY, MAKING SURE PRODUCT IS ONE CONSISTENCY.
KEEP CONTAINER CLOSED WHEN NOT IN USE, AS PRODUCT REACTS WITH ATMOSPHERIC
MOISTURE
EQUIPMENT:
APPLY WITH ROLLER, SPRAY OR BRUSH.
SPRAY TIP SIZE: 0.013 to 0.017
HOSE SIZE: 114 TO 3/8 INCH.
CAUTION: SURFACE Temperature MUST BE [5]
DEGREES ABOVE THE DEWPOINT BEFORE APPLYING.
CLEANUP: USE XYLENE TO FLUSH AND CLEAN
EQUIPMENT IMMEDIATELY AFTER USE.
SAFETY PROCEDURES: SEE MSDS Sheet :(click here)
