E-1000 Polyester Anti-Graffiti
Clear Finish Coat.

Chemical Family: Polyester- Isocyanate.

Description: E-1000 is a formulation of Polyester based system, that affords a very hard, high solids and high luster coating, that has proven to hold high gloss retention qualities, much longer than the more conventional Coatings, thereby standing extremely durable, when exposed to Affluent, Abrasion and Molestation.

E-1000 the is recommended for substrate where there is a need for an Anti-Graffiti protection and for final coat over other coatings to obtain higher gloss for Anti-Grafity Protection, over other coatings on marine vessels, autos and any where there is a need for Chemical and Abrasion Protection

Mix 2 Parts (A) to 1 Part (B) Stir Thoroughly, Part (A) while Adding Part (B)

Thinning is not recommended, as viscosity stays constant while in container and used within Pot Life of 3 -- 4 hours. Depending on temperature and humidity.

Caution: Apply@5 Degrees F. above the Dew Point.

Curing time:

• To touch three to five hours
• To handle 6--7 hours
• Mar free 15 hours

Recoat time: 8 hours at 25 degrees C. and @ 50% humidity.

The surface must be free of dust by vacuuming and lent free clothes, before applying

Coverage: Recommended DFT-1.0-2, Wet Mils: 1.5 to 3

Clean up: A blend of MEK @20% PM Acetate @ 30% and Aromatic100@50%

Shelf life: One Year@77 Degrees F.

Marker, Pass [Slight Shadow] Spay Paint, Pass.

XEON Arc Weathering:

ASTM G Type B Method-2 @ 300 Hours. Cracking, none. Checking, none. Other Film defects, none.

MSDS Sheet :(click here) Part 1, Part 2